ny installerad brännare men får inte igång det

[ostis23]

Hade tidigare en samsung brännare, (minns inte namnet) som var ansluten med en Flatkabel. den nya brännaren, också en samsung som heter TSSTcorp CDDVDW SH-S203B Version: SB01, är ansluten med en sata kabel till sata port 3.

Nu är jag ingen expert på det här med datorer, särskillt inte att skruva i dom... finns det olika satakablar? hur vet jag om jag har rätt kabel?

hur som helst, testade att bränna 2 skivor med olika program.

 

försök 1, en .img fil på en TDK DVD-R 4.7gb 16X, Med IMGBurn.

 

Log från imgburn:

[log]

I 19:52:13 ImgBurn Version 2.3.2.0 started!

I 19:52:13 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 19:52:13 Total Physical Memory: 1 048 048 KB - Available: 686 144 KB

I 19:52:13 Initialising SPTI...

I 19:52:13 Searching for SCSI / ATAPI devices...

I 19:52:13 Found 1 DVD±RW/RAM!

I 19:53:20 Operation Started!

I 19:53:20 Source File: ************

I 19:53:20 Source File Sectors: 2 245 548 (MODE1/2048)

I 19:53:20 Source File Size: 4 598 882 304 bytes

I 19:53:20 Source File Volume Identifier: ************

I 19:53:20 Source File Implementation Identifier: AuthoringWare Co. USA

I 19:53:20 Source File File System(s): ISO9660; UDF (1.02)

I 19:53:20 Destination Device: [2:0:0] TSSTcorp CDDVDW SH-S203B SB01 (G:) (ATA)

I 19:53:20 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 4x; 6x; 8x; 12x; 16x)

I 19:53:20 Destination Media Sectors: 2 297 888

I 19:53:20 Write Mode: DVD

I 19:53:20 Write Type: DAO

I 19:53:20 Write Speed: 6x

I 19:53:20 Link Size: Auto

I 19:53:20 Test Mode: No

I 19:53:20 BURN-Proof: Enabled

I 19:53:21 Filling Buffer... (40 MB)

I 19:53:22 Writing LeadIn...

W 19:53:22 Failed to Write Sectors 32 - 63 - Invalid Address For Write

W 19:53:22 Retrying (1 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (2 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (3 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (4 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (5 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (6 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (7 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (8 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (9 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (10 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (11 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (12 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (13 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (14 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (15 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (16 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (17 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (18 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (19 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

W 19:53:22 Retrying (20 of 20)...

W 19:53:22 Retry Failed - Invalid Address For Write

E 19:57:27 Failed to Write Sectors 32 - 63 - Invalid Address For Write

E 19:57:27 Next Writable Address: 0

I 19:57:27 Synchronising Cache...

E 19:57:28 Failed to Write Image!

E 19:57:28 Operation Failed! - Duration: 00:04:07

I 19:57:28 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

I 19:57:29 Close Request Acknowledged

I 19:57:29 Closing Down...

I 19:57:29 Shutting down SPTI...

I 19:57:29 ImgBurn closed!

 

 

--------------------------------------------------------------

 

Försök 2, en .AVI fil på 350mb ca, på en Verbatim CD-R 700mb 48X med nero 8.

 

Log från nero:

 

Windows XP 5.1

IA32

WinAspi: -

 

NT-SPTI used

Nero Version: 8.1.1.0

Internal Version: 8, 1, 1, 0

 

Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB01 - HA 1 TA 0 - 8.1.1.0

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <TSSTcorp CDDVDW SH-S203B >Version: SB01 - HA 1 TA 0 - 8.1.1.0

Adapter driver: <IDE> HA 1

 

=== Scsi-Device-Map ===

DiskPeripheral : Maxtor 6L200M0 nvatabus Port 1 ID 0 DMA: Off

DiskPeripheral : Maxtor 6V320F0 nvatabus Port 1 ID 2 DMA: Off

CdRomPeripheral : TSSTcorp CDDVDW SH-S203B nvatabus Port 2 ID 0 DMA: Off

 

=== CDRom-Device-Map ===

TSSTcorp CDDVDW SH-S203B G: CdRom0

=======================

 

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1023MB (1048048kB)

Free physical memory: 576MB (589832kB)

Memory in use : 43 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

 

11.10.2007

CD-ROM (ISO)

15:41:59 #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

15:41:59 #2 Text 0 File Isodoc.cpp, Line 6671

Iso document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : FALSE

Multisession : TRUE

Multisession type: : Start multisession

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

 

15:41:59 #3 Text 0 File Burncd.cpp, Line 3212

TSSTcorp CDDVDW SH-S203B

Super Link activated

 

15:41:59 #4 ISO9660GEN -11 File Geniso.cpp, Line 3347

First writeable address = 0 (0x00000000)

 

15:41:59 #5 Text 0 File Burncd.cpp, Line 3530

Turn on Disc-At-Once, using CD-R/RW media

 

15:41:59 #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142

FS Settings: using validator ''CUDFSettingsValidatorCD''

ParamMode = ''automatic'', changing UDF partition type from ''physical'' to ''physical''

Changing UDF revision from ''1.02'' to ''1.02''

 

15:42:00 #7 Text 0 File DlgWaitCD.cpp, Line 307

Last possible write address on media: 359845 ( 79:59.70)

Last address to be written: 180885 ( 40:13.60)

 

15:42:00 #8 Text 0 File DlgWaitCD.cpp, Line 319

Write in overburning mode: NO (enabled: CD)

 

15:42:00 #9 Text 0 File DlgWaitCD.cpp, Line 2972

Recorder: TSSTcorp CDDVDW SH-S203B;

CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation

ATIP Data:

Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)

Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

 

15:42:00 #10 Text 0 File DlgWaitCD.cpp, Line 493

>>> Protocol of DlgWaitCD activities: <<<

=========================================

 

15:42:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 785

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 180886 (180886) = #180886/40:11.61

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 180886 blocks [G: TSSTcorp CDDVDW SH-S203B]

--------------------------------------------------------------

 

15:42:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 986

Prepare [G: TSSTcorp CDDVDW SH-S203B] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc not fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 370761728, ISRC ""

DAO layout:

===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________

-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 180886 | 0 | 0x00

180886 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

 

15:42:00 #13 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

 

15:42:00 #14 Text 0 File Burncd.cpp, Line 4316

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

 

15:42:00 #15 Phase 24 File dlgbrnst.cpp, Line 1764

Caching of files started

 

15:42:00 #16 Text 0 File Burncd.cpp, Line 4435

Cache writing successful.

 

15:42:00 #17 Phase 25 File dlgbrnst.cpp, Line 1764

Caching of files completed

 

15:42:00 #18 Phase 36 File dlgbrnst.cpp, Line 1764

Burn process started at 48x (7 200 KB/s)

 

15:42:00 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2735

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

 

15:42:00 #20 Text 0 File MMC.cpp, Line 17745

StartDAO : CD-Text - Off

 

15:42:00 #21 Text 0 File MMC.cpp, Line 22430

Set BUFE: Super Link -> ON

 

15:42:00 #22 Text 0 File MMC.cpp, Line 17973

CueData, Len=32

41 00 00 14 00 00 00 00

41 01 00 10 00 00 00 00

41 01 01 10 00 00 02 00

41 aa 01 14 00 28 0d 3d

 

15:42:00 #23 Text 0 File ThreadedTransfer.cpp, Line 268

Pipe memory size 83836800

 

15:42:11 #24 SPTI -1502 File SCSIPassThrough.cpp, Line 181

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)

Sense Key: 0x04 (KEY_HARDWARE_ERROR)

Sense Code: 0x08

Sense Qual: 0x03

CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00

Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03

Buffer x083a0300: Len x10000

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

15:42:11 #25 CDR -1502 File Writer.cpp, Line 306

DMA-driver error, CRC error

G: TSSTcorp CDDVDW SH-S203B

 

15:42:37 #26 Phase 38 File dlgbrnst.cpp, Line 1764

Burn process failed at 48x (7 200 KB/s)

 

15:42:38 #27 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

 

15:42:40 #28 Text 0 File Cdrdrv.cpp, Line 11276

DriveLocker: UnLockVolume completed

 

15:42:40 #29 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

 

Existing drivers:

 

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

 

jag läste i något annat forum om någon som hade liknande problem, dom hade löst det med att ändra på primery och slave inställningar, va in i bios och kikade lite. Vet inte om det ska vara så, men såhär va det inställt iaf...

IDE Primary Master :None

IDE Primary Slave :None

IDE Secondary Master :None

IDE Secondary Slave :None

IDE Third Master :Maxtor 6L200MO

IDE Fourth Master :Maxtor 6V320FO

IDE Fifth Master :TSSTcorp CDDVDW SH-S203B

IDE Sixth Master :None

[/log]

förstår inte särskillt mycket av dom här loggarna men jag hoppas att någon kan hjälpa mig!

 

[inlägget ändrat 2007-10-11 16:29:52 av ostis23]

[inlägget ändrat 2007-10-11 17:01:32 av ostis23]

[inlägget ändrat 2007-10-11 17:01:58 av ostis23]

 

LOG-taggar inlagt av moderator.

 

[inlägget ändrat 2007-10-11 17:04:48 av Maratonmannen]

[Åke.L]

Jag kanske inte skulle ge mig in och svara när jag inte förstår vad du skriver men jag provar !

 

För det första, är brännaren intern eller extern ?

 

Vad menar du med satakabel (flatkabel), är brännaren intern så är det väl en IDE kabel ?

I så fall så ska den stiftas som Master eller slav, master om den ansluts till yttre kontakten och där bör den helst anslutas.

 

 

 

[Tomas80]

Jag har inte lusläst dina loggar, men du skall ändå få ett spontant svar.

 

Eftersom programmen hittar brännaren, så tycks det som om alla sladdar och byglar sitter rätt.

 

Du har bara testat att bränna två skivor och brännaren är helt ny. Det verkar inte alltför nedslående. Testa några till, och ställ då ner hastigheten mycket.

 

Är det kvalitetsskivor? Har du testat skrivorna i en annan brännare så att du VET att du fungerar?

 

Det finns ett gratisprogram som heter DVDInfoPro, som kan visa detaljerad information om brännaren, testa det.

 

Sedan kan man kanske testa att rengöra brännaren med en rengöringsskiva.

 

Har du fortfarande problem? Återkom, så kan jag titta närmare på det.

 

[ostis23]

Tack för svaren:) men listade ut va det va tillslut! Nvidias drivrutiner, avinstallerade dom så löste sig allt:D tack

 

[Tomas80]

Oj, det var långsökt, att drivrutiner till grafikkortet kan påverka CD-bränning. Tillåt mig att tvivla.