Just nu i M3-nätverket
Gå till innehåll

CPU-kontakt på MB


Mark_Trade

Rekommendera Poster

Jag köpte ett nytt moderkort som har 8-pinnars CPU-kontakt men det sitter ett lock över fyra av "jacken".

Går det att driva CPUn med en 4-pinnars kontakt i 8-pinnars uttaget?

 

Länk till kommentar
Dela på andra webbplatser

Hejsan!!

 

Nedanstående text är hämtad här:

http://www.playtool.com/pages/psuconnectors/connectors.html#eps8

 

Vet ej om det hjälper dej men det finns massor av info om kontakter.

 

You can plug a 4 pin 12 volt power cable into an 8 pin EPS motherboard connector but there's no guarantee that it will work. If the motherboard expects only one 12 volt rail then a 4 pin 12 volt cable may work. If the motherboard expects two 12 volt rails (many dual CPU motherboards require one 12 volt rail per CPU) then it won't work. Even if the motherboard works with a 4 pin 12 volt cable, you are still only providing half of the current carrying capacity which would be provided by an 8 pin EPS cable. That can overheat both the motherboard connector and 4 pin cable. Scorched or melted connectors can be a result. A motherboard which has the 8 pin EPS connector expects a lot of current and you are taking a serious risk by plugging in a 4 pin cable. The 4 pin cable only fits at one end of the 8 pin EPS motherboard connector so you can't plug it in improperly. That is, it only fits into one end of the motherboard connector unless you force it. If the cable doesn't go into the socket easily then you're probably trying to plug it into the wrong end. But then again, it's not a good idea to try to run with a 4 pin cable in an 8 pin motherboard anyway.

 

 

Mvh Thomas

 

 

[inlägget ändrat 2009-01-15 23:24:24 av Thomas1]

Länk till kommentar
Dela på andra webbplatser

Arkiverat

Det här ämnet är nu arkiverat och är stängt för ytterligare svar.

×
×
  • Skapa nytt...