Just nu i M3-nätverket
Gå till innehåll

Osynkront ljud


Speedy Mike

Rekommendera Poster

Hej

Jag har ett TV-kort, Pinnacle TV pro. När jag spelar in TV på hårddisken blir det ibland osynkront mellan bild och ljud. Vad göra?

Mikael H

 

Länk till kommentar
Dela på andra webbplatser

mmh, svårt...

men hur mycket belastas processorn vid inspelning?

 

Vilket format spelar du in i?

 

 

/T

 

Even when we know we´ll never find the answers, we have to keep on asking questions.

 

Länk till kommentar
Dela på andra webbplatser

Pinnacle har ett program som heter PPE (Pinnacle PCI Performance Enhancer). Det programmet löste mitt problem med synk på mitt Pinnacle PCTV Pro. Programet hittar du bland annat här om du inte redan har det på din skiva ftp://ftp.pinnaclesys.de/driver/pc/extras/PPE107.exe

 

Så här skriver Pinnacle själva

[log]What is the problem?

 

Pinnacle video editing boards like DC10plus, DC30, Studio DV/Studio Dvplus, Studio AV/DV, DV500, PCTV Sat or Pro-One require a certain bandwidth on the PCI bus to transfer video and audio data. Without that, problems like dropped frames or bad bad frames may occur during video capture or video output.

Such problems are typically caused by other PCI devices consuming too much bandwidth, and/or by wrong PCI settings within the BIOS setup.

The PPE tool attempts to fix these problems by changing some BIOS PCI settings. In most cases it cures the dropped frames / bad frames problem, in some cases it does not help, and in some cases it makes the PC work worse than before.

It needs to be used to run a Pinnacle video editing board in a PC using a VIA mainboard chipset.

 

When and how to use PPE?

If you see the problems described above with your Pinnacle video editing board and want to attempt fixing this with the PPE tool, install it by running the ppe.exe file. Restart your PC to activate the new settings.

 

How to deinstall PPE?

To deinstall the PPE tool in case it causes problems or does not work, use 'Control Panel' / 'Install/Deinstall Programs', select the PPE tool, and click 'Add/Remove'. Then restart your PC to switch back to the default BIOS PCI settings.

[/log]

-nisse

If at first you don´t succeed,

redefine success.

[Edit: Stavfel i vanlig ordning]

 

[inlägget ändrat 2005-11-27 22:22:40 av NWM]

Länk till kommentar
Dela på andra webbplatser

Arkiverat

Det här ämnet är nu arkiverat och är stängt för ytterligare svar.

×
×
  • Skapa nytt...